ACP - Confree Series
The ACP3 P1 F1300 is a two-way splitter or one-way tap with external AC feed. The functionality is programmed by the insertion of one Plug-In Module (PIM). It is DOCSIS 3.1 Ready.
The ACP4 P2 is a three-way splitter or two way tap. Using two Plug-In Modules provides many combination possibilities.
Advantages
- Flexibility through PIM modules
- Power inserter option
- Durability through component choice, solid die-cast and
- Class A housing
Attachments
| Specification - ACP3 P1 | |||
| PIM type | Out 1 ± 1.0 dB | Out 2 ± 0.5 dB | |
| PIM 0A | 0.6 | - | |
| PIM 0B | - | 0.6 | |
| PIM 4 | 4.4 | 4.4 | |
| PIM 1-7 | 7.9 | 3.0 | |
| PIM 1-10 | 10.9 | 2.4 | |
| PIM 1-13 | 13.4 | 1.7 | |
| PIM 1-16 | 15.9 | 1.4 | |
| PIM 1-19 | 18.9 | 1.3 | |
| Specification - ACP4 P2 | |||
| PIM type | Out 1 ±1.0 dB | Out 2 ±1.0 dB | Trunk output ±0.5 dB |
| PIM 4 + PIM 4 | 4.5 | 8.5 | 8.5 |
| PIM 1-7 + PIM 4 | 8 | 8 | 8 |
| PIM 1-10 + PIM 1-7 | 11 | 13 | 4 |
| PIM 1-13 + PIM 1-13 | 13.5 | 14.5 | 3 |
| PIM 1-16 + PIM 1-16 | 16 | 17 | 2.2 |
| PIM 1-19 + PIM 1-19 | 19 | 19.5 | 2 |
|
Frequency range: |
5-1000 MHz 20 dB (40-1000 MHz -1.5 dB/oct.) Max 10 A Class A - min. 85/75 dB PG11 thread - optional 5/8 or cable shells 70 dB |
Accessories for Confree
Accessories for CONFREE including Rubber cap, RF shielding plate, Power inserter and PG11A adaptors.
The rubber cap increases the IP to IP66 and it improves protection against steam, dust and other enviromental influences. The RF shielding plate improve RFi to above Class A screening utilizing the CONFREE cable shells. The RF shielding plate is not necessary when using PG11 connectors.
The PG11M-AC Power Inserter makes it possible to feed trunk passives locally to provide power for remote line feeded amplifiers.
